Stella SW-C

The STELLA SW needs no introduction: it’s Shimano’s most high-end, durable, strong and powerful spinning reel which is recognized for it’s quality and durability by anglers all over the world. The reel has been improved on many points: it is even stronger, more though, more durable and more powerful. The STELLA SW is built to be very strong and powerful, making it possible to fish for big salt water species with spinning tackle. The range includes many different sizes and gear ratio’s for many different techniques and purposes.

Where to buy? Manual

Product's Videos

Watch

Product Technologies

Hagane Gear The HAGANE Drive Gear is produced by Shimano’s coldforging technology, without the need for additional machining. This delivers a longlasting smoothness, strength, lightness and power at the very heart of the reel. Traditional diecast, machined gears are less durable under heavy loads.	Hagane Body The HAGANE Body is produced from highrigidity aluminium or magnesium. This creates stiffness and impact resistance, while at the same time eliminating flexing of the body. The result is a rocksolid housing and support for the moving internal gearing and greater efficiency throughout the reel.	Silent_Drive Removed ‘clicking’ sound and ‘handle play’ and overall improved smooth reeling.	InfinityDrive INFINITY DRIVE is a new construction that eliminates sliding resistance and realizes light winding in both load and no-load conditions. INFINITY DRIVE is a non-contact construction where the inside of the pinion gear does not touch the main shaft. This reduction in sliding resistance is achieved by the application of a special low friction bushing which holds the main shaft and in addition a by the application of a special surface treatment to the main shaft itself. Handle rotation torque is reduced by approximately 30%* compared to the conventional X-SHIP construction.	Heatsink_drag During drag operation accumulated heat in the drag mechanism reduces drag force and in addition the increase of spool temperature can damage PE lines. The conventional X TOUGH drag realizes an overwhelming improvement in both drag performance and durability with a revolutionary structure in which the drag mechanism part is located at the lower part of the spool. Shimano’s HEATSINK DRAG is the evolution of the conventional X TOUGH drag and manages the heat efficiently in two ways. Firstly, heat is released through a heat sink panel on the bottom of the spool resulting in 50%* more drag force retainment. Secondly, an insulation sheet in between the drag mechanism and the spool surface area results in a 30%* lower spool temperature.
XShield By providing dependable sealing structures and gaskets at necessary points, including the reel body and lid joint and the contact point of the spool and drag knob, possible water ingress is blocked. This double protection provides high reliability and durability to the STELLA SW when used in extreme saltwater conditions.	XProtect The contact type triplelip structure is introduced to the roller clutch, the pivotal point concerning water resistance. In this structure, the first lip prevents water from entering through the space between the rotor and the body. In addition, the special grease between the second and third lip where it makes contact with the rotor collar located at the upper part of the roller clutch not only resists water from entering but also minimizes friction resistance. Without jeopardizing the ‘silky smooth rotation capacity’, the vital feature of STELLA SW, exceptional water resistance, has been achieved to withstand the crashing and splashing of waves and spray.	XTough Drag The drag system of the new STELLA SW has advanced enormously in terms of toughness, smoothness and performance. The basic drag performance has been extensively reviewed and each of the metal and carbon drag washers show excellent heat resistance and durability. Through an indepth study of the thickness and frictional force of each component within the drag system, the best combinations for optimum performance parameters have been found for each model and size. Further, the structure supporting the middle surface of the spool, from both the top and bottom, efficiently disperses the load, securing a smooth and stable drag force. Inside the drag knob, a coiled wave spring is mounted to allow anglers to make fine adjustment, even when under a heavy load.	ARC Spool Shimano ARC Spool is a patented spool design with an angled spool lip. This design enables the line to leave the spool with less friction and in smaller coils resulting in longer more accurate casts. ARC spools are proven to reduce backlash and wind knots when using braid.	E.I. Surface Treatment E.I Surface treatment doubles the durability of the spool surface and gives less wear out by eliminating oxidation.
S ARB Shimano S ARB bearings are high corrosion resistant ARB ball bearings with an extra shield for improved protection against sand, salt or dust.	One Piece Bail The onepiece bail wire has no gap for line to snag on during normal operation. Made of Stainless Steel, it reduces friction and allows the line to get onto the line roller quicker.

Product Specifications

Body Material

Aluminium (X-Shield)

Bearings

13+1

Family Type

Heavy Duty Spinning

Extra Spool

Models

8000, 10000, 14000

Spool Material

Cold forged aluminium (TI LIP)

Waterproof Drag

X-Shield

Handle

Screw in forged, aluminium handle (single)

Filter by:

Item code	Spare Spool	Weight (g)	Gear Ratio	Bearings	Max Drag (kg)	Line Capacity (mm/m)
Item code	Spare Spool	Weight (g)	Gear Ratio	Bearings	Max Drag (kg)	Line Capacity (mm/m)
Item code STLSW10000PGC	Spare Spool -	Weight (g) 670	Gear Ratio 4.9:1	Bearings 13+1	Max Drag (kg) 25	Line Capacity (mm/m) 0.405-300/0.47-210/0.52-160
Item code STLSW14000XGC	Spare Spool -	Weight (g) 675	Gear Ratio 6.2:1	Bearings 13+1	Max Drag (kg) 25	Line Capacity (mm/m) 0.405-330/0.47-240/0.52-195
Item code STLSW18000HGC	Spare Spool NO	Weight (g) 875	Gear Ratio 5.7:1	Bearings 13	Max Drag (kg) 25	Line Capacity (mm/m) 0.520-310/0.570-240/0.620-20
Item code STLSW20000PGC	Spare Spool NO	Weight (g) 885	Gear Ratio 4.4:1	Bearings 13	Max Drag (kg) 25	Line Capacity (mm/m) 0.520-350/0.620-240/0.700-19
Item code STLSW30000C	Spare Spool NO	Weight (g) 975	Gear Ratio 4.4:1	Bearings 13	Max Drag (kg) 25	Line Capacity (mm/m) 0.620-400/0.700-300/0.740-27
Item code STLSW4000HGC	Spare Spool NO	Weight (g) 355	Gear Ratio 5.7:1	Bearings 12	Max Drag (kg) 11	Line Capacity (mm/m) 0.30-180/0.35-130
Item code STLSW4000XGC	Spare Spool NO	Weight (g) 355	Gear Ratio 6.2:1	Bearings 12	Max Drag (kg) 11	Line Capacity (mm/m) 0.30-180/0.35-130
Item code STLSW5000HGC	Spare Spool NO	Weight (g) 420	Gear Ratio 5.7:1	Bearings 13	Max Drag (kg) 13	Line Capacity (mm/m) 0.33-200/0.37-150/0.405-130
Item code STLSW5000XGC	Spare Spool NO	Weight (g) 420	Gear Ratio 6.2:1	Bearings 13	Max Drag (kg) 13	Line Capacity (mm/m) 0.33-200/0.37-150/0.405-130
Item code STLSW6000HGC	Spare Spool NO	Weight (g) 425	Gear Ratio 5.7:1	Bearings 13	Max Drag (kg) 13	Line Capacity (mm/m) 0.33-240/0.37-190/0.405-160
Item code STLSW6000PGC	Spare Spool NO	Weight (g) 425	Gear Ratio 4.7:1	Bearings 13	Max Drag (kg) 13	Line Capacity (mm/m) 0.33-240/0.37-190/0.405-160
Item code STLSW6000XGC	Spare Spool NO	Weight (g) 425	Gear Ratio 6.2:1	Bearings 13	Max Drag (kg) 13	Line Capacity (mm/m) 0.33-240/0.37-190/0.405-160
Item code STLSW8000HGC	Spare Spool -	Weight (g) 625	Gear Ratio 5.6:1	Bearings 13+1	Max Drag (kg) 25	Line Capacity (mm/m) 0.370-275/0.405-230/0.470-160
Item code STLSW8000PGC	Spare Spool -	Weight (g) 625	Gear Ratio 4.9:1	Bearings 13+1	Max Drag (kg) 25	Line Capacity (mm/m) 0.370-275/0.405-230/0.470-160

Shimano Cycling

China

China

Korea

Korea

ASEAN

South East Asia

Oceania

Australia

New Zealand

Latin America

L.A. Countries

Brasil

Shimano Rowing

Asia

Asia

America

North America

Europe

EUROPE

Shimano Fishing

Asia

Japan

China

South East Asia

Oceania

New Zealand

Australia

North America

US

Latin America

L.A. Countries

Brasil

EU

English

Italiano

Nederlands

Français

Polski

český

русский

Deutsch

Türkçe

Norway

Español

Finland

Portugal

Iceland

Estonia

Denmark

Lithuania

South Africa

Latvia

Sweden

Global

PowerPro

Stella SW-C

Product's Videos

Product Technologies

Product Specifications

Filter by:

Item code

Spare Spool

Weight (g)

Gear Ratio

Bearings

Max Drag (kg)

Line Capacity (mm/m)