Twin Power SW

The new TWIN POWER SW challenges the impossible head on. It takes years of SHIMANO Big Game knowledge and experience, combines it with unrivalled engineering and delivers it in one amazing reel. Containing many of the features found on the Stella SW, considered by many to be the world's most advanced big game reel, TWIN POWER SW has the strength to cope with unrelenting battles from large offshore game fish, whilst retaining the sophistication and finesse to maximise fishing performance and enjoyment. HAGANE Body, HAGANE Gear, X-SHIP and Silent Drive refinement combine to increase winding performance and smoothness, X-Shield and X-Protect offer unsurpassed water protection and Heat Sink Drag inspires fish-playing confidence in the most extreme situations. In the world of extreme big game fishing you need a reel that will meet your expectations, in the heat of the battle. A reel which is stronger, smoother and immensely powerful. You need the new TWIN POWER SW.

Where to buy? Manual

Product's Videos

Watch

Product Technologies

Hagane Gear The HAGANE Drive Gear is produced by Shimano’s coldforging technology, without the need for additional machining. This delivers a longlasting smoothness, strength, lightness and power at the very heart of the reel. Traditional diecast, machined gears are less durable under heavy loads.	XShip XShip is a combination of features that work together to create much greater efficiency. By positioning the pinion gear close to the centre line of the large diameter drive gear, more power is transferred from the handle to the rotor. The pinion gear is also supported by two Shimano ARB roller bearings. This creates more stability.	Hagane Body The HAGANE Body is produced from highrigidity aluminium or magnesium. This creates stiffness and impact resistance, while at the same time eliminating flexing of the body. The result is a rocksolid housing and support for the moving internal gearing and greater efficiency throughout the reel.	Heatsink_drag During drag operation accumulated heat in the drag mechanism reduces drag force and in addition the increase of spool temperature can damage PE lines. The conventional X TOUGH drag realizes an overwhelming improvement in both drag performance and durability with a revolutionary structure in which the drag mechanism part is located at the lower part of the spool. Shimano’s HEATSINK DRAG is the evolution of the conventional X TOUGH drag and manages the heat efficiently in two ways. Firstly, heat is released through a heat sink panel on the bottom of the spool resulting in 50%* more drag force retainment. Secondly, an insulation sheet in between the drag mechanism and the spool surface area results in a 30%* lower spool temperature.	InfinityDrive INFINITY DRIVE is a new construction that eliminates sliding resistance and realizes light winding in both load and no-load conditions. INFINITY DRIVE is a non-contact construction where the inside of the pinion gear does not touch the main shaft. This reduction in sliding resistance is achieved by the application of a special low friction bushing which holds the main shaft and in addition a by the application of a special surface treatment to the main shaft itself. Handle rotation torque is reduced by approximately 30%* compared to the conventional X-SHIP construction.
XProtect The contact type triplelip structure is introduced to the roller clutch, the pivotal point concerning water resistance. In this structure, the first lip prevents water from entering through the space between the rotor and the body. In addition, the special grease between the second and third lip where it makes contact with the rotor collar located at the upper part of the roller clutch not only resists water from entering but also minimizes friction resistance. Without jeopardizing the ‘silky smooth rotation capacity’, the vital feature of STELLA SW, exceptional water resistance, has been achieved to withstand the crashing and splashing of waves and spray.	Silent_Drive Removed ‘clicking’ sound and ‘handle play’ and overall improved smooth reeling.	ARC Spool Shimano ARC Spool is a patented spool design with an angled spool lip. This design enables the line to leave the spool with less friction and in smaller coils resulting in longer more accurate casts. ARC spools are proven to reduce backlash and wind knots when using braid.	One Piece Bail The onepiece bail wire has no gap for line to snag on during normal operation. Made of Stainless Steel, it reduces friction and allows the line to get onto the line roller quicker.	S ARB Shimano S ARB bearings are high corrosion resistant ARB ball bearings with an extra shield for improved protection against sand, salt or dust.
XShield By providing dependable sealing structures and gaskets at necessary points, including the reel body and lid joint and the contact point of the spool and drag knob, possible water ingress is blocked. This double protection provides high reliability and durability to the STELLA SW when used in extreme saltwater conditions.

Product Specifications

Body Material

ALUMINUM (X-SHIELD)

Bearings

10+1

Family Type

Spinning

Extra Spool

Models

4000, 5000, 6000, 8000, 10000, 14000

Spool Material

COLD FORGED ALU

Waterproof Drag

X-SHIELD

Handle

SCREW IN MACHINED ALU SINGLE HANDLE+CI4+ ROUND KNOB

Filter by:

Item code	Weight (g)	Gear Ratio	Bearings	Max Drag (kg)	Line Capacity (mm/m)
Item code	Weight (g)	Gear Ratio	Bearings	Max Drag (kg)	Line Capacity (mm/m)
Item code 5SF41M061	Weight (g) 425	Gear Ratio 4.6:1	Bearings 10+1	Max Drag (kg) 13	Line Capacity (mm/m) 0.33-240/0.37-190/0.405-160
Item code TPSW10000HGC	Weight (g) 655	Gear Ratio 5.6:1	Bearings 10+1	Max Drag (kg) 25	Line Capacity (mm/m) 0.405-300/0.47-210/0.52-160
Item code TPSW10000PGC	Weight (g) 655	Gear Ratio 4.9:1	Bearings 10+1	Max Drag (kg) 25	Line Capacity (mm/m) 0.405-300/0.47-210/0.52-160
Item code TPSW14000XGC	Weight (g) 660	Gear Ratio 6.2:1	Bearings 10+1	Max Drag (kg) 25	Line Capacity (mm/m) 0.405-330/0.47-240/0.52-195
Item code TPSW4000XGC	Weight (g) 345	Gear Ratio 6.2:1	Bearings 9+1	Max Drag (kg) 11	Line Capacity (mm/m) 0.30-180/0.35-130
Item code TPSW5000HGC	Weight (g) 420	Gear Ratio 5.7:1	Bearings 10+1	Max Drag (kg) 13	Line Capacity (mm/m) 0.33-200/0.37-150/0.405-130
Item code TPSW5000XGC	Weight (g) 420	Gear Ratio 6.2:1	Bearings 10+1	Max Drag (kg) 13	Line Capacity (mm/m) 0.33-200/0.37-150/0.405-130
Item code TPSW6000HGC	Weight (g) 425	Gear Ratio 5.7:1	Bearings 10+1	Max Drag (kg) 13	Line Capacity (mm/m) 0.33-240/0.37-190/0.405-160
Item code TPSW6000XGC	Weight (g) 425	Gear Ratio 6.2:1	Bearings 10+1	Max Drag (kg) 13	Line Capacity (mm/m) 0.33-240/0.37-190/0.405-160
Item code TPSW8000HGC	Weight (g) 615	Gear Ratio 5.6:1	Bearings 10+1	Max Drag (kg) 25	Line Capacity (mm/m) 0.370-275/0.405-230/0.470-160
Item code TPSW8000PGC	Weight (g) 615	Gear Ratio 4.9:1	Bearings 10+1	Max Drag (kg) 25	Line Capacity (mm/m) 0.370-275/0.405-230/0.470-160

cycling

Shimano Rowing

Asia

Asia

America

North America

Europe

EUROPE

Shimano Fishing

Asia

Japan

China

South East Asia

Oceania

New Zealand

Australia

North America

US

Latin America

L.A. Countries

Brasil

EU

English

Italiano

Nederlands

Français

Polski

český

русский

Deutsch

Türkçe

Norway

Español

Finland

Portugal

Iceland

Estonia

Denmark

Lithuania

South Africa

Latvia

Sweden

Global

PowerPro

Twin Power SW

Product's Videos

Product Technologies

Product Specifications

Filter by:

Item code

Weight (g)

Gear Ratio

Bearings

Max Drag (kg)

Line Capacity (mm/m)